BESTip ATA Combo User Manual
9
Rear Panel
There are four connectors on the rear panel to connect to the
related devices. The description is listed below (left to right).
DC 12V
DC Adapter Connector: connects to the 12V DC
power adapter.
Phone
RJ-11 Connector: FXS interface for connecting to
an analog phone set or C.O. port of PBX.
Line RJ-11
Connector:
connects to the wall phone jack.
LAN RJ-45
Connector:
cables to your IP network.
PHONE LINE
LAN
DC 12V
BESTip ATA Combo User Manual
10
Chapter 2: Installation
This chapter will describe how to connect your BESTip ATA
Combo.
Package Contents
The package of the BESTip includes the following:
A
BESTip
ATA
Combo
A
DC
power
adapter
Two RJ11 phone cord
A RJ45 network cable
Requirements to Use the BESTip
Before making an Internet call with your BESTip ATA Combo,
you also need the following items:
1 touch-tone phone sets
A
110/220V
electrical outlet
A valid Internet account (Dial-Up)
A valid Internet connection (ADSL, Cable or others):
The following parameters about the network (LAN, WAN, I
nternet, etc.) to which the BSETip will be connected must
be known if Static IP mode will be used.
IP Address for BESTip
Gateway IP Address
IP Netmask
DNS (Domain Name Server)
IP Address
Note
: Write down the values for these IP parameters. You may
need to enter these values in the following chapter.