1
Remove the mattress.
2
Remove the slats.
By removing the mattress,
the bed frame will rise quickly.
3
Unscrew the facades
(screws VR-215).
VR-215
4x
BESTAR is released from any responsibility and will void the warranty if the disassembly is not performed according to the instructions
in this manual. BESTAR and its distributors (and their respective officers, directors, agents and servants) shall not be liable or obligated
in any manner for any direct, punitive, exemplary, special, indirect, incidental or consequential damages of any kind, regardless of the
form of action, whether in contract, tort, negligence, strict product liability or otherwise, arising out of or in connection with improper
anchoring of the bed or non-compliance to the anchoring procedure of this document.
* Qualified person:
It is necessary to have a good understanding of the wall anchors that were used during the original installation on
your wall structure of wood, metal, masonry or any other type of wall.
If you don't have the necessary skills
, make sure that the
disassembly is done by someone who has the qualifications and required knowledge, and that he or she follows the required steps.
When you choose the installer, make sure to comply with all applicable regulations in the province, state or country where the furniture
is installed.
Important information to read before starting the disassembly.
Keep this information for future reference.
IMPORTANT WARNINGS
Bed may tip over and you may be seriously injured if you don't follow these instructions.
• Only a qualified person * must proceed with the disassembly of the wall bed, as well as the
reinstallation and any possible adjustment.
• Improper disassembly of the wall bed may cause serious injuries to the installer as well
as the people near the bed.
THE BED SHOULD REMAIN ANCHORED TO THE WALL FOR THE FOLLOWING STEPS (1 TO 9).
IMPORTANT: THE BED SHOULD REMAIN ANCHORED TO THE WALL FOR THE FOLLOWING STEPS (1 TO 9).
116184 AN
39
SERVICE: 1-888 8BESTAR (1-888 823-7827)
DISASSEMBLY
