manualshive.com logo in svg

Bestar 116184-110017, Manual

Share
Download
Bestar 116184-110017 Manual Download Page 23

7

Using a 1/2 in (13 mm) diameter metal bit, drill into the drywall 
and the metal studs.

Metal

studs

Drywall

WALL ANCHORING INSTRUCTIONS

INSTALLATION RECOMMENDATIONS — METAL STUDS

INSTALLATION AND APPROPRIATE HARDWARE

Using appropriate hardware, all the anchor screws of the wall bed must be firmly 
secured to the wood or metal studs, the structural components, or a masonry wall.

Only wall anchor screws for wood-frame walls are provided with this bed.

NEVER USE DRYWALL ANCHOR SCREWS OR SECURE THE BED TO DRYWALL

See wall anchoring requirements and installation notes provided in the 
instruction manual, according to the type of wall, and use the appropriate 
anchors such as described in this manual. 

NUMBER OF SCREWS NEEDED

Two (2) screws are required for each anchor point. Three (3) wall anchor points 
are necessary for the proper installation of the wall bed. So you need a total 
of six (6) wall anchor screws.

THE SCREWS MUST BE VERY WELL ANCHORED TO THE STRUCTURAL 
COMPONENTS OF THE WALL.

IMPORTANT WARNINGS

!

6

Move the bed again.

116184  AN

23

SERVICE: 1-888 8BESTAR (1-888 823-7827)

Summary of Contents for 116184-110017











































Reviews:

No comments

Brands by name

Popular brands

Load more brands