Guide
The device provides Guide for operating the device.
Maintenance
1. Keep it dry. Precipitation, humidity and liquid that contains
minerals will corrode electronic circuits.
2. Do not use or store it in dusty, dirty areas as its detachable
parts may be damaged.
3. Do not store it in hot areas. High temperatures can shorten the
life of electronic devices, damage batteries, and melt certain
plastics.
4. Do not store it in cold areas. When the device warms up,
moisture can form inside it, which may damage electronic circuit
boards.
5. Do not attempt to take the device apart. Improper handling may
damage the device.
6. Do not drop, knock or shake it. Improper handling may cause
damage to the liquid crystal panel.
7. Do not use harsh chemicals, cleaning solvents, or strong deter
gents to clean the device.
8. Do not paint it. Paint can clog the device's detachable parts and
cause it to malfunction.
9. Do not operate the device below the temperature 0 or over 40
degrees. Excessive heat or cold will cause malfunction and incur
damage to the device. To avoid such from happening, please do
not use the device for two hours after it has been exposed to
９
a. Tap
to open the function
list.
b. And then tap [Guide] to look up
more information.
excess heat or cold, because the humidity or moisture formed
by the temperature changing will cause damage to the device.
Items
1. This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and
receiver.
--Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
--Consult the dealer or an experienced radio/TV technician for
help.
2. Modification, adjustment, and replacement of parts : Besta is
not responsible for unauthorized modification, adjustment, and
replacement of parts on this product. Any such changes may
void the warranty.
3. This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions : (1) This device may
not cause harmful interference, and (2) This device must
accept any interference received, including interference that
may cause undesired operation.
4. SAR Exposure Statement
This EUT is compliance with SAR for general population/
