Power On/Off
Power Off: Long press ON/OFF key and then choose "Power
off"
Interval: When the device is unused, please press ON/OFF key
gently. The screen enters power-saving mode.
Awakening: On power-saving mode, press ON/OFF key to
awaken this mode.
Power On: Long press ON/OFF key till the start-up picture is
shown.
Make sure the battery quantity is below 5% at the first three charge,
so that the battery could achieve the best condition. We suggest you
repeat this at each quarter.
Touch-control Screen
It is good for the device to
use the provided stylus.
˙
Selection-tapping:
Choose the function
on the screen and tap
it gently with the stylus.
Make sure the stylus leave
the screen after tapping.
˙
Long-tapping:
Open a new menu option or
activate a selected option.
˙
Dragging:
Drag the stylus without its tip
leaving the screen. By that
way, you could choose or
move the selected option.
First Use & Preparation
Power Source & Charger
Rechargeable Li-batteries Inside: 2500mAh
Power Source: USB cable/USB+adaptor (It is good for the
device to use the specified adaptor of the device. It is available
to use 1A/2A adaptor of other brand. Such as Iphone, HTC
etc.)
Micro SD Card
2
a. Connect device with power source
as shown on the right
b. LED
will show the charging state
LED keep flashing: charging...
LED keep intermittently flashing:
unusual charging
LED keep lighting: charging complete
˙
Insert a card: switch off the
device first. Gently push the
card into the card jack until
you hear a sound.
˙
Remove a card: switch off
the device first. Gently press
the card until you hear a
sound.
3
˙
For avoiding flicking of the card, please gently press the card.
˙
When transfer or open files on Micro SD, in order to avoid data loss
or abnormal of the data . Please make sure the power is off, before
inserting and removing card.
Adaptor
USB Cable
USB Cable
