View From Inside
1.
Select the door with the siding and trim board extending past the 2x4 frame, see detail below.
Standing on the inside of building slide the rollers on the left side track as shown below.
If it is necessary to adjust the door height one or both door carriers can be adjusted. Loosen
screws that secure carrier(s) to the door. Adjust door so the aluminum angle, on the bottom
of the door, does not rub on the treated threshold. Tighten the screws.
Tip: Inserting a screw, shown below, will prevent the doors from falling through the opening
between the track, if the door is opened too far.
First DoorTrim & Siding
Extends Past Siding
2x4 Frame
Adjustment Screws
Screw Stop
Install track rollers on this track leg.
Door Track
End View
Space
Between
Legs
Track Leg
IMPORTANT:
DO NOT install both track rollers in the space between the Track Legs.
Install the track rollers on either side of the inside track leg.
See detail below.
Step 21A
Install Doors
