Step 5
Set Wall Panels
1.
Erect back wall and side walls. IMPORTANT: Install the side walls with the 'C' marks oriented
against the back and front wall panels. Secure walls together at the corners. Use (4) four 10d
sinkers per corner. Brace side walls with pre-cut wall studs to hold walls secure and plumb.
2.
Cut a OSB panel in half lengthways. Install a 24" wide panel at the back corner, flush with
the back wall 2x4 frame and flush with top plate. Nail OSB to back wall and all 2x4s using
6d common nails spaced 8" apart
3.
Install (5) five more OSB panels. The last 24" wide panel will extend 3-1/2" past wall to receive
front wall panel.
4.
Start at back wall and OSB siding to opposite wall.
5.
Erect front wall panel and secure corners with 10d sinkers. Nail OSB to front wall.
6.
Cut and remove bottom 2x4 from door opening.
7.
Nail walls to floor through bottom plate. Space 16d galv. nails 24" apart.
Back Wall
Cut 2x4 Plate
from Opening
End Marked 'C'
End Marked 'C'
End Marked 'C'
24" Wide
Panel
