VI
Instructions
1
Quick Use
(1) Insert batteries.
(2) Press the measurement button to turn on the infrared forehead
thermometer and the display will activate.
(3) the front end of the thermometer is aligned with the forehead, and
the distance is 3 to 5 cm.
(4) After 2 seconds, the prompt sounds, indicating that the measurement
is completed, and the measurement data on the screen can be read.
2 Mode selection
In the power-on state, press the "Set" key to select the measurement of
body temperature and surface temperature, and the screen will show the
body temperature and surface temperature; press and hold to switch
between "
°C
" and "
°
F" modes.(The temperature measured in the surface
temperature mode is the surface temperature of the object, and the
temperature measured in the body temperature mode is the human body
temperature.)
3
Memory query
In standby mode, press the "+" key to query the memory upwards, and
press the "-" key to query the memory downwards. A total of 32 sets of
memory can be queried.
(5) Do not use the instrument outdoors or in a place with strong sunlight.
(6) Do not hold the front of the thermometer during measurement.
(7) The measurement site must not be covered by hair. If there is sweat,
please wipe it with a dry towel and measure it later. Otherwise it will affect
the measurement result.
(8) Cold measurement of the forehead of a fever patient, sweating, and
other cooling measures will make the measurement result low, and
measurement should be avoided in this case.
(9) Comparison of different temperature measurement methods.
The body temperature measured by different temperature measurement
methods will be different.