BESAFE iZi Combi X4 ISOFIX, Manual

Page: 354 / 395

High Voltage Battery
ES8 is equipped with a floor-mounted 350 volt lithium-ion high voltage battery.
Never breach the high voltage battery when lifting from under the vehicle. When
using rescue tools, pay special attention to ensure that you do not breach the floor
pan.
Danger
Before servicing or disassembling a high voltage component, you must power off
the system. Make sure both the emergency switch and the 12V battery are cut off.
After powering off the vehicle, put the vehicle standstill for at least five minutes
before carrying out any operation.
Danger
As the voltage of the battery pack bus reaches about 400V, in the process of
removing and installing high-voltage components, it is necessary to obtain the
qualification of low-voltage electrician; the operator must wear high-voltage
insulating gloves and take other insulation protective measures without carrying
any metal objects.
Driving Motor
The driving system powers the vehicle by converting the direct current from the
high voltage battery into mechanical torque which is distributed to the four
wheels. In addition, it can also recover kinetic energy to charge the high voltage
battery and operate in reverse to turn the drive shafts backward. The driving
system consists of two driving motors. The front motor is mounted on the front
subframe, and the rear motor is mounted on the rear subframe.
Low voltage battery
The 12 voltage battery operates the SRS, airbags, windows, door locks,
touchscreen, and interior and exterior lights. The high voltage system charges the
12 voltage battery, and the 12 voltage battery supplies power to the high voltage
contactors, allowing high voltage current to flow into and out of the high voltage
battery.
The 12V battery is located behind the trim panel on the left of the trunk.
Airbags
The airbag system includes front airbags and side airbags. The front airbags
include front head airbags that are located in the steering wheel and on the
Emergency Rescue
352