BESAFE iZi Combi X4 ISOFIX, Manual

Page: 238 / 395

2. Enter the Settings page from the leftmost side of the control bar at the
bottom of the center display and tap Lights > Auto High Beam to enable or
disable this feature.
3. Push the lever away from you and release to activate Auto High Beam. This
feature automatically switches between high beams and low beams when
driving at over 40 km/h.
4. Push the lever again or pull it back to cancel Auto High Beam.
Auto High Beam may not automatically control the headlights in some situations,
including but not limited to:
• When turn signals are on.
• When the steering wheel is turned too fast.
• When navigating a sharp curve.
• When the wiper speed is set to maximum.
• When fog lights are on.
Warning
This feature may be impaired in heavy rain, snow, fog and other extreme weather
conditions, or when the camera is blocked. Please drive with caution.
Turn Signals
• Left: push the lever down
• Right: push the lever up
The turn signals stop operating when the steering wheel returns to the center
position or the lever is moved back to the center.
Driving
236