- 17 -
V. 2.0
8.3. Application to thermal and/or electric motors
For application to pulleys, check the alignment of the two pulleys.
Maximum transmission ratio:
Once K has been determined it is possible to establish the diameter of the pulley motor or
pump
Pulley motor pitch diameter:
Pulley pump Pitch diameter: ø pp = ø p pulley motor x K
N.B. for any special installation or use refer to Bertolini's "Technical
Assistance Service" to avoid annoying difficulties.
WARNING! All electrical connections must be carried out by specialised
technicians.
WARNING! The plant constructor is responsible for the installation of
sufficient protection for all moving parts such as the shaft, pulleys,
additional parts etc.;
WARNING! Do not work on the pump or electric pump with wet hands in wet
conditions generally or on a wet surface.
K
pump
n
motor
n
=
'
'
K
pulley
p
ø
øpm
.
.
.
=
