Berthoud WIN'AIR 1000, Manual

Page: 29 / 46

29
4.5. CLEANING THE FILTERS
•
Power take-off stopped, place ( fi gure 19, page 21):
- The valve ( A ) on function .
- The valve ( B ) on function .
- The valve ( C ) on function .
- The valve ( D ) on function .
•
Open and clean the fi lters (position a bucket to
recover the residues).
SUCTION FILTER
( fi gure 32)
•
Before opening the suction fi lter (2), drain the
cartridge by unscrewing the yellow cap (3).
•
To clean the fi lter:
- Undo the nut (1).
- Remove the cap (3).
- Push the fi lter down and clean it.
•
If a leak appears on the lid after putting the fi lter
back, tighten the nut (1) slightly.
DELIVERY FILTER
( fi gure 33)
•
Before opening the delivery fi lter (4), drain the
cartridge by opening the tap (6) (recover the
residues in a bucket).
•
To clean the fi lter:
- Undo the fi lter body (5).
- Push the fi lter down and clean it.
•
If a leak appears on the lid after putting the fi lter
back, tighten the body (5) slightly.
4.6. PUMP MAINTENANCE
PUMP APS 61
•
Check oil level every 50 hours.
•
Drain the pump every 200 hours.
•
Check pump valves ( fi gure 34):
- Unscrew the screws (7).
- Remove all the valves and check status:
▪ 1. Sticking of valve on its seat - free and then
oil.
▪ 2. If presence of foreign matters, remove them.
▪ 3. Deterioration of valve, valve seat or cage:
replace the defective component.
The inspection operation and the replacement of
diaphragms should only be performed by quali
fi ed
personnel (see your BERTHOUD dealer).
34
33
4
5
6
32
7
1
2
3