16
3.1. FILLING / INCORPORATION
•
Close the drain outlet using valve (
E
) (
fi
gure 4) located under the main tank, on the front and on the left-
hand side.
•
Fill the tank with clean water (previously screened if your water source can contain particles).
CAUTION: The sprayer MUST be hitched to the tractor prior to the
fi
lling operation to
prevent any risk of tipping.
INCORPORATION OF LIQUID PRODUCT
•
With the drain valve (
E
) closed,
fi
ll the main tank
to 2/3 with clean water.
•
Power take-off stopped, place (
fi
gure 5):
- The valve (
A
) on function
.
- The valve (
B
) on function
.
- The valve (
C
) on function
.
- The valve (
D
) on function
.
•
Check that the turbine is released.
•
Engage the tractor’s power take-off and raise its
rotation speed to 300 rpm.
SIEVE ONLY
•
Remove the sieve and pour the liquid products
into the tank.
SIEVE WITH CAN RINSING (as option)
•
Pour all your liquid products through the sieve.
•
Pre-rinsing of can with the spray mixture (
fi
gure 6):
- Place the valve (
B
) on function
.
- Insert the diffuser into the can and press on it.
- Release effort and the can is pre-rinsed.
- Repeat the operation if necessary.
•
Rinsing the can with clean water
Place, in order (
fi
gure 7):
- The valve (
B
) on function
.
- The valve (
D
) on function
.
- Insert the diffuser into the can and press it.
- Release effort and the can is rinsed.
- Repeat the operation if necessary.
•
Replace, in order (
fi
gure 5):
- The valve (
D
) on function
.
- The valve (
B
) on function
.
•
After complete incorporation,
fi
nish
fi
lling the tank
to the desired volume (see gauge) with clean water.
•
Allow the mixture to be mixed until an even mixture
is obtained.
INCORPORATION OF POWDER PRODUCT
•
With the drain valve (
E
) closed,
fi
ll the main tank
to 2/3 with clean water.
•
Power take-off stopped, place (
fi
gure 8):
- The valve (
A
) on function
.
- The valve (
B
) on function
.
- The valve (
C
) on function
.
- The valve (
D
) on function
.
•
Check that the turbine is released.
•
Engage the tractor’s power take-off and raise its
rotation speed to 300 rpm.
SIEVE ONLY
•
Remove the sieve and pour the powder into the
tank.
SIEVE WITH INCORPORATOR (as option)
•
Pour the powder into the sieve and close the lid.
•
Place the valve (
C
) on function
(
fi
gure 9).
•
To open the lid again, place the valve (
C
) on
function
(
fi
gure 8).
•
Repeat the operation if necessary.
•
After complete incorporation,
fi
nish
fi
lling the tank
to the desired volume with clean water (check the
level via the gauge).
•
Allow the mixture to be mixed until an even mixture
is obtained.
Summary of Contents for WIN'AIR 1000
