10
82.526 - HERMES
2.3 TAPE GAUGE (Option)
A tape gauge (1), rhighly visible from inside the tractor
cab and at control station (BERLOGIC) is positioned
on the top of the equipment. It shows the volume
contained in the main tank.
1
05
2.4 BOOM HEIGHT
A working height (H) between 50 and 60cm above
the surface to be treated is recommended. It is defined
by the nozzle spraying angle and spacing.
There is a risk of drift with a greater height.
H
06
2.5 RINSING TANK
A 120-litre clean water tank (2) is used to rinse
the sprayer.
The rinsing tank (2) is positioned under the right
hand side of the main tank.
Its filling level can be seen from the tractor cab and
at the control station via a direct read float gauge (3).
IMPORTANT:
The rinsing tank MUST be filled with
clean water, not under pressure:
•
Via the cover (1).
•
Or via the connector (4) situated
on the control station. To fill, open
valve (D).
07
1
4
D
2
3
Summary of Contents for HERMES 1000
Page 22: ...22 82 526 HERMES 7 SPRAYING CIRCUIT...
Page 25: ...82 526 HERMES 25...
