3
82.486 "AXIALE II" Booms
- Suspension "autostable pendular" type.
- Boom frame mounted on parallelogram.
- Anti-whip structure based on trianguled concept.
- Steel structure protected by surface treatment, and polyester paint heat treated in furnace.
- Indicators for height, angle correction and geometry.
- All hydraulic functions controlled by electro-hydraulic spool valves or electro-hydraulic selector.
- Boom ends with break-back protection in 3 dimensions.
- Nozzle-holder piping made of Ø 25 x 23 polypro or stainless steel.
- Spacing between nozzle-holders: 0.50 m.
- Quadrix nozzle-holders with diaphragm anti-drip device.
- NOZAL nozzle-nut mounted 1/8 turn.
TECHNICAL SPECIFICATIONS
"AXIALE" SUSPENSION
Boom arm
Boom arm
Mobile frame of
the boom
Level correcting ram
Shock absorbers
Floating or
stabilizing
bar
Balance
spring
Boom central
balance point
- The AXIALE suspension "autostable pendular" type,
is based on the principle of a balance positioned near
the gravity center of the boom.
- Balance is maintained, and, consequently, the boom
remains parallel to the
axle
, as a result of the action
of 4 springs (20/21/24/27/28 m) or for 6 springs
(30/32/33 m).
- These springs continuously correct position of the
boom.
- Two shock absorbers provide a final filter against
shocks.
- Angle correction, is provided by a ram acting on the
floating and stabilizing bar to which the springs are
attached.
Summary of Contents for AXIALE II ED Series
