20
82.486 "AXIALE II" Booms
WHEN WORKING
- To modify the
angle corrector
, set the selector switch (2) in position (D), and actuate the handle of the
tractor's double effect hydraulic distributor.
UNFOLDING ARMS
1 - POWER UP THE CONTROL BOX
Raise switch (1), the lamp (a) lights.
2 - CLEARANCE OF THE BOOM FROM ITS
SUPPORTS
Without tracking drawbar option:
Actuate the tractor's double effect hydraulic
distributor until the boom is completely off its
supports.
With tracking drawbar option:
Raise switch
and hold it until the boom is
completely clear of its supports.
3 - UNFOLDING THE MAIN ARMS (BP)
Set the selector (2) to position (BP) and actuate
the handle of the tractor's double effect hydraulic
distributor until the main arms are completely
unfolded.
4 - UNFOLDING THE END ARMS (BE)
Set the selector (2) to position (BE) and actuate
the handle of the tractor's double effect hydraulic
distributor until the end arms are completely
unfolded.
5 - ADJUSTMENT OF BOOM HEIGHT
Without tracking drawbar option:
Actuate the handle of the tractor's double effect
hydraulic distributor to adjust boom height.
With tracking drawbar option:
Raise switch
and hold it to lift the boom.
Lower switch
and hold it to lower the boom.
FOLDING ARMS
1 - RAISE THE BOOM
Without tracking drawbar option:
Actuate the handle of the tractor's double effect
hydraulic distributor to lift the boom.
With tracking drawbar option:
Raise switch
and hold it to lift the boom.
2 - FOLDING THE END ARMS (BE)
Set the selector (2) to position (BE) and actuate
the handle of the tractor's double effect hydraulic
distributor until the end arms are completely folded.
3 - FOLDING THE MAIN ARMS (BP)
Set the selector (2) to position (BP) and actuate
the handle of the tractor's double effect hydraulic
distributor until the main arms are completely folded.
4 - LOWER THE BOOM ONTO THE SUPPORTS
Without tracking drawbar option:
Actuate the handle of the tractor's double effect
hydraulic distributor to lower the boom onto the
arm supports.
With tracking drawbar option:
Lower and hold switch
to lower the boom onto
the arm supports.
In road position,
set the selector switch (2) to 0.
ELECTRICAL CONTROL BOX of the "AXIALE II" SEH BOOM
with MECHANICAL LOCK
(figure 18)
Summary of Contents for AXIALE II ED Series
