Safety Instructions
junior
6
The following safety instructions are to be observed
before starting the instrument and during its operation:
The instrument may only be put into operation by
authorized persons and used by properly-trained
personnel. All users of the instrument must first read the
instruction manual.
Users should only carry out maintenance and repair
procedures found in the manual. During these procedures,
no equipment other than that mentioned in the manual
should be used. All maintenance and repair work not
covered in the instruction manual is to be carried out only
by
service
technicians
authorized
by
BERTHOLD
TECHNOLOGIES.
Make sure that the power supply provided is suitable for
your line voltage.
Always keep the sample holder clean!
Avoid electrostatic charges!
BERTHOLD TECHNOLOGIES accepts no liability (also in
cases of third-party involvement) for damages caused through
improper use of the instrument.
For the safety of the user and to ensure good working
condition, the proper steps for starting, testing and
maintaining the instrument are to be followed.
!