junior
7. Processing the Results
45
o
This causes the first measured result corresponding to
the entered point in time and the defined site
identification to be displayed.
o
Page further with the
key until you reach the readout
of the result that you would like to display.
o
Press the <
ENT
> key to delete the displayed
measurement.
o
The safety query
[Delete measurement?]
will appear.
o
Pressing the <
ENT
> key again will cause the displayed
measurement to be deleted and the next measurement
to be displayed. The deletion is aborted with the <
ESC
>
key, and you can continue paging through the list.
o
In this way, you can delete measurements at your
discretion.
o
Pressing the <
ESC
> key returns you to the [
Results
]
sub-menu.