7. Processing the Results
junior
42
7.2
Transferring Data to a PC
The measured results can be selected using the time of
measurement and the site identification number and
subsequently transferred to a PC.
Procedure:
o
Connect the USB 2.0 port on the
rear side of the instrument with
serial free USB port of your PC and
start your terminal program (see
Chap. 2.3).
o
On the
junior
’s display, select the
[
PC
] option.
o
Press the <
ENT
> key.
o
The [
Display by Starting Point at
]
display is shown with the selection
criteria. Automatically the actual
date, time and the site “
0
” are
presented. If nothing is changed,
the oldest result is transferred.
o
Enter [
Date
] and [
Time
] as the
starting point. This causes all
measurements taken between the
entered point in time and the
current date to be selected for
transfer.
o
As a further criterion for selection,
enter
the
[
Site
]
identification
number for the measurements that
should be transferred. If you would
like to display the measurements
independently
from
the
site
identification, enter
”0”
.
o
Select [
Start Search
] with the cursor and press the
<
ENT
> key.
o
This causes all results corresponding to the time and
site criteria to be transferred to the PC. The message
[
Transfer of data
] will appear on the display.
o
Pressing the <
ESC
> key returns you to the [
Results
]
sub-menu.
Results
Screen
PC
delete
ENT
Display by
Starting at:
Date : 12/28/1997
Time : 06:20 pm
Location : 1
start search
ENT
Transfer of data
Figure 7.3:
Transferring results
to a PC