junior
7. Processing the Results
41
7.1
Readouts on the Display
The results can be selected using the time of measurement
and the site identification number and subsequently shown
one after the other on the LC-display.
Procedure
o
Select the [
Screen
] option.
o
Press the <
ENT
> key.
o
The [
Display by starting at
]
display
is
shown
with
the
selection criteria. Automatically
the actual date, time and the site
“
0
” are presented. If nothing is
changed, the oldest result is
shown.
o
Enter [
Date
] and [
Time
] as the
starting points. This causes all
measurements taken between
the entered point in time and the
current date to be selected for
readout.
o
As
a
further
criterion
for
selection,
enter
the
[
Site
]
identification number for the
measurements that should be
displayed. If you would like to
display
the
measurements
independently
from
the
site
identification, enter
”0”
.
o
Select [
Start Search
] with the
cursor and press the <
ENT
> key.
o
This causes the first (= earliest in
terms
of
time)
result
corresponding to the selection
criteria to be shown.
o
Page further with the
key.
o
Pressing the <
ESC
> key returns you to the [
Results
]
menu.
Results
Screen
PC
delete
ENT
Display by
Starting at:
Date :12/28/1997
Time : 06:20 pm
Location : 1
Start search
ENT
Assay: ATP
Date: 12/28/1997
Time: 06:20 pm
Location: 1
Result: pass
RLU: 111
Figure 7.2:
Displaying results