CDP Installation Manual
33
1.
The location of the zoom dial is shown in Figure 53
Figure 52 - Measuring alignment annotation
Figure 53 - Zoom dial location on projector
h.
Re-visit step vi.) and adjust the joystick until annotations are in the final position
i.
The crosshairs final position is shown in Figure 54
1.
The base position can be adjusted slightly to make the crosshair align on
the balance plate as shown in Figure 54
ii.
The rectangular annotation final is shown in Figure 55
1.
Align both annotations as close to the edge of the screen as possible
2.
Generally, one rectangle pattern is slightly behind the other, the ideal
resting place is just barely overlapping the edge of the screen
Figure 54 - Final Alignment image crosshair placement