CDP Installation Manual
28
1.
The back stop screws, circled in red in Figures 42 & 43, will determine
the initial position of the mounting plate
Figure 42 - Top down view of projector on screen frame
Figure 43 - Side view of projector on screen frame
iv.
Back off slightly from back stop screws until through-holes on projector plate
align with threaded holes on projector mounting rails
e.
Secure Projector plate onto the rails as shown in Figure 44
i.
(4) 1/4 -
20 x 5/8” SHC using a 3/16” hex tool
Figure 44 - Securing projector assembly to mounting rails