6
EN
/ Installation
The installation, adjustments, transformations and
maintenance listed in this section must only be
performed by qualifi ed technicians (in accordance
with applicable legislation). Incorrect installation
can cause property damage and injury to people
or pets; the manufacturer shall not be held liable
in this event. The appliance’s automatic regulation
or safety devices may only be modifi ed by the
manufacturer or a duly authorised supplier during
the appliance’s lifetime.
Ensure all necessary PPE is used when
carrying out the installation
INSTALLING THE HOB
Ensure that the hob is fully present and undamaged
after removing all loose parts from their inner and
outer packaging. In the event of any uncertainty,
do not use the appliance and contact technical
support.
Make a cut-out in the worktop (see fi gure) in
accordance with the appliance dimensions given
in the table.
IMPORTANT INFORMATION
The hob may be installed between kitchen cabinets
or between a cabinet and a (masonry) wall. The
rear wall and surrounding surfaces must be able to
withstand temperatures of up to 90°C. To prevent
peeling of the melamine laminate typically used
on kitchen carcases, the glue bonding it must be
able to withstand temperatures of at least 150°C.
Installation of the appliance must be performed
in accordance with the provisions of applicable
legislation.
This domestic appliance is not connected to an
extraction device for combustion products. It
must therefore be connected in accordance with
the above-mentioned installation rules. Particular
attention must be paid to room ventilation
requirements.
The worktop must be able to withstand a maximum
temperature of 90°C (120°C for the 75cm version)
TECHNICAL INSTALLATION INSTRUCTIONS
TECHNICAL INSTALLATION INSTRUCTIONS
%
&
'
)
$
(
*
M
N
P
Q
L
H
A (cm) B(cm)
H(cm)
L(cm)
60cm hob
56
48
60,5
52,5
75cm hob
56
48
75,5
52,5
90cm hob
85
48
89,3
52,5
C min (cm)
8,5
M (cm)
4,4
D min (cm)
3
N (cm)
1,1
E min (cm)
18
P (cm)
47,4
F min (cm)
70
Q (cm)
4
G min (cm)
8,5
