3
Installer information The installation, all adjustments, transformations and maintenance listed in this
part of the manual must
be carried out only by skilled personnel.
Improper installation may cause damage to persons, animals or property, for
which the manufacture will not be held responsible.
The appliance safety or automatic adjustment devices may be changed during
the service life of the system only by the manufacturer or by the duly authorised
supplier.
Installing the cooker After having removed the various loose parts from the internal and external
packing, make sure that the cooker is not damaged. In case of doubt, do not use
the appliance and contact skilled personnel.
Keep all the dangerous packing parts (polystyrene foam, bags, cardboard,
staples, etc.) away from children.
The appliance can be installed as a freestanding unit, next to a wall at a distance of
less than 20mm (Fig.1B, Class 1Installation) or inserted between two walls (see
Fig.1A, Class 2 Subclass 1 Installation). A single sidewall that exceeds the height
of the work surface is possible. This must be at a minimum distance of 70 mm from
the edge of the cooker (see Fig.1B, Class 1 Installation).
Any walls of the adjacent furniture pieces and the wall behind the cooker must be
made with heat-resistant material that can withstand a minimum over temperature
of 65 K.
WARNING: the connection to the gas network must only use metal flexible
pipes that conform with the national standards in force.
Fig.1A
Fig.1B
Summary of Contents for her series
Page 44: ...44 ...
