BEROTEC GmbH
P a g e
|
8
MOFESSOR
Manual
Possible mounting positions:
•
On the side of the sprocket
o
visible
o
can get damaged when changing tires
o
rotation of the sprockets transports the oil into the chain
•
On the side of the
pinion
o
unvisible and protected
o
rotation transports the oil into the chain
o
higher oil spill through higher rotation speed possible
•
direct application to the chain
o
oil needs to be applicated on the inside of the chain
o
easy to mount
o
oil spill through wind turbulences of oil drips possible
o
nozzle can get hit by the chain
The best place for the installation of the nozzle always depends on the
motorbike.
For the installation of the nozzle, a nozzle mounting clamp, a self-
adhesive nozzle mount with clamping screw and self-adhesive hose
holders are provided. The oil hose can be locked into the hose holders.
The clamping screw (torque: 0,4NM) of the nozzle mount locks the nozzle
position. The surface needs to be degreased properly. Bended surfaces
are not suitable for the use of the self-adhesive mounts. The processing
temperature is at least 20°C.
