Setting up the machine
31
> At the marking on the upper right corner of the stitch plate, push the stitch plate downwards until it tips.
> Remove the stitch plate.
> Place the new stitch plate such that both openings are positioned above the BSR sensors.
> Press the stitch plate down until it clicks into position.
2.6 Bobbin thread
Winding the bobbin
> Place the empty bobbin on the spool axis such that the label on the bobbin is
not
visible.
> Place the spool on the right spool pin.
> Insert the thread first in the eyelet positioned vertically above the spool and then in the right rear eyelet
of the thread guide.
> Guide the thread once around the thread pre-tension (1) in a counterclockwise direction.
> Wind the thread clockwise three or four times around the empty bobbin.
> Pull the excess thread over the thread cutter at the lever (2) and cut.
1
2
Summary of Contents for Q 16
Page 1: ...BERNINA Q 16 User manual...
Page 2: ......
