Bernina artista 200 Embroidery Owner'S Manual Download Page 36

Page: 36 / 43

ASTERING

OUR

BERNINA

9 /1/02

ECTION

artista 200 Embroidery

/36

BERNINA

artista 200 Embroidery

ASTERING

OUR

BERNINA

CHANGING LETTERING SPACING SAMPLER

Owner’s manual pg.___
• In this exercise, a Lettering Spacing sampler will be created.
• This motif will be created using the Medium hoop.
• Begin by accessing the

Alphabet folder

• Select the

King Charles alphabet

• Input the word -

artista

• Touch

• Select the

Medium hoop

•

Duplicate

the word “artista” so that there are a total of three copies in the hoop.

• Use the

Move Motif

symbol and the

Retrive

function to move the different copies into separate

positions within the hoop - refer to the sample picture.
All of the words will have a “0” position of the Stitch width knob.

- 1st artista

Stitch length knob - Po300

- 2nd artista

Stitch length knob - Position 0

- 3rd artista

Stitch length knob - Position - 300

• The “artista” positioned ar the top has NO Lettering Spacing changes.
•

Retrieve

the middle “artista”

• Touch the

Letter Manipulation

symbol.

• Change the

Letter Spacing to 3mm

• Touch

•

Retrieve

the bottom “artista”.

• Touch the

Letter Manipulation

symbol.

• Change the

Letter Spacing to 5mm

• Touch

• When the combination is complete, touch

• After hooping the fabric and stabilizer in the Medium hoop, embroider the combination.
• Trim and mount the sample on the following page.

Fabric:

Firm fabric and stabilizer, 11” x 13”

Needle:

Embroidery

Thread:

Isacord embroidery thread
Choose thread colors to match motif

Presser Foot:

Embroidery Foot #15

Built-in Motifs:

King Charles alphabet

Summary of Contents for artista 200 Embroidery












































Search results

Summary of Contents for artista 200 Embroidery

Reviews:

Related manuals for artista 200 Embroidery

Brands by name

Popular brands

Bernina artista 200 Embroidery, Owner'S Manual

Search results

Summary of Contents for artista 200 Embroidery

Reviews:

Related manuals for artista 200 Embroidery

Brands by name

Popular brands