M
ASTERING
Y
OUR
BERNINA
®
9 /1/02
S
ECTION
B
artista 200 Embroidery
/34
BERNINA
®
artista 200 Embroidery
M
ASTERING
Y
OUR
BERNINA
®
CHANGING LETTERING HEIGHT SAMPLER
Owner’s manual pg.___
• In this exercise, a Lettering Height sampler will be created.
• This motif will be created using the Medium hoop.
• Begin by accessing the
Alphabet folder
.
• Select the
Drifter alphabet
• Input the word -
BERNINA
.
• Touch
OK
.
• Select the
Medium hoop
.
•
Duplicate
the word “BERNINA” so that there are a total of five copies in the hoop.
• Use the
Move Motif
symbol and the
Retrive
function to move the different copies into separate
positions within the hoop - refer to the sample picture.
•
Retrieve
the “BERNINA” at the top of the hoop.
• Touch the
Letter Manipulation
symbol.
• Change the
Letter Height to 6mm
.
• Touch
OK
.
• Repeat this process for each “BERNINA” word.
• Make the
Lettering Height adjustments
and
Positioning adjustments
as follows.
All of the words will have a “0” position of the Stitch width knob.
Adjust the position of each word in the hoop by using the Stitch length knob.
- 1st BERNINA
Height 6mm
Po500
- 2nd BERNINA
Height 10mm
Po350
- 3rd BERNINA
Height 14mm
Po150
- 4th BERNINA
Height 18mm
Position - 100
- 5th BERNINA
Height 20mm
Position - 400
• When the Lettering Height combination is complete, touch
OK
.
• After hooping the fabric and stabilizer in the Medium hoop, embroider the combination.
• Trim and mount the sample on the following page.
Fabric:
Firm fabric and stabilizer, 8” x 10”
Needle:
Embroidery
Thread:
Isacord embroidery thread
Choose thread colors to match motif
Presser Foot:
Embroidery Foot #15
Built-in Motifs:
Drifter alphabet
