manualshive.com logo in svg

Bernina artista 170 QPE, Owner'S Workbook

Share
Download
Bernina artista 170 QPE Owner'S Workbook Download Page 67

M

ASTERING

 Y

OUR

 

BERNINA

®

1/10/02

artista 

170 QPE/180

/67

BERNINA

®

 

artista 

170 QPE/180

M

ASTERING

Y

OUR

BERNINA

®

GATHERING FOOT #16

• Trim all four edges of the sample fabric before beginning.
• Select stitch #1 - lengthen to 5mm.
• Place fabric to be gathered under the foot.
• Guide the fabric, keeping the raw edges even with the right edge of the foot, or use the seam
  lines on the throat plate.

Notes:
- There are three things that effect the amount of gathers:

1.  Fabric Weight - The lighter weight the fabric, the easier to gather.
2. Tension - Increased upper tension will increase the amount of gathering.
3. Stitch Length - The longer the stitch length, the tighter the gathers.

- Use the basting stitch or the long stitch function to increase gathers in heavier weight fabrics
  such as woolens and corduroys.

Fabric:

Medium weight cotton, 10” x 4”

Needle:

80/12 Universal

Thread:

All-purpose sewing

Presser Foot:

Wide Gathering Foot #16 (optional accessory) or
Extra-wide Gathering Foot #16 (optional accessory)

Summary of Contents for artista 170 QPE




































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands