manualshive.com logo in svg

Bernina artista 170 QPE, Owner'S Workbook

Share
Download
Bernina artista 170 QPE Owner'S Workbook Download Page 109

M

ASTERING

 Y

OUR

 

BERNINA

®

1/10/02

artista 

170 QPE/180

/109

BERNINA

®

 

artista 

170 QPE/180

M

ASTERING

Y

OUR

BERNINA

®

Before stitching this exercise, read the information completely and stitch the Memory Mania exercise from
the previous page.

-Sew out stitches or motifs on muslin first.
-Leave space below and above the center row, where the monogram is.
-Draw guide lines to guide the rows of stitches.
-Sampler can be laid out as below or use your creative license.
-Add or delete rows as needed to create desired look.

MEMORY SAMPLER

Fabric:

Muslin - 6” x  6” (folded to 3” x 6”)

Stabilizer:

As needed

Needle:

90/14 Universal

Thread:

30 wt. cotton

Presser Foot:

Reverse Pattern Foot #1/1C

Row #1:
Large motif (180 only)

Row #2:
Use wing needle and #701

Row #3:
#414/1x, #718/3x, #414/1x, #1/6x

Row #4:
#406/1x, #416/1x, #415/2x #406/1x

Row #5:
Name/Monogram (180 only)/Date

Row #6:
#329/1x and Mirror Image and #329/1x again

Row #7:
#711/1x, #716/1x, Mirror Image and #716/1x, clear
Mirror Image and #716/1x again, #711/1x, #1/6x

Row #8:
Use a double needle and two different colors thread
with #714; engage Double Needle Limitation.

Summary of Contents for artista 170 QPE




































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands