manualshive.com logo in svg

Bernina artista 170 QPE, Owner'S Workbook

Share
Download
Bernina artista 170 QPE Owner'S Workbook Download Page 40

M

ASTERING

 Y

OUR

 

BERNINA

®

1/10/02

artista 

170 QPE/180

/40

BERNINA

®

 

artista 

170 QPE/180

M

ASTERING

Y

OUR

BERNINA

®

BUTTONHOLE  FEET

A number of buttonhole feet are available for BERNINA

®

 sewing machines.

The descriptions below will help differentiate between the various feet.

BUTTONHOLE FOOT #3

The standard 5mm buttonhole foot.

Works with any BERNINA

®

 sewing machine

BUTTONHOLE FOOT WITH SLIDE #3B

A 5mm foot with a movable slide indicating

buttonhole length, making it easy to

stitch a series of identical buttonholes.

Works with any BERNINA

®

 sewing machine.

AUTOMATIC BUTTONHOLE FOOT #3A

Automatic foot for machines with a 5mm and

9mm feed system. “A” indicates an “automatic”

foot, with a light sensor for counting stitches.

Works with models 1130-1530 and 150-170 QPE.

BUTTONHOLE FOOT #3C

The standard 9mm buttonhole foot.

“C” indicates a “coded” foot, with a light
 sensor that allows 9mm wide stitching.

Works with models 1630 and 

artista

 180.

AUTOMATIC BUTTONHOLE FOOT #3C

The automatic buttonhole foot for

machines with a 9mm feed system,

indicated by the letter “C”.

Works with models 1630 and 

artista

 180.

AUTOMATIC  BUTTONHOLE  FOOT  WITH  SLIDE  #3A

Combines the handy slide measuring system of

Buttonhole Foot #3B with the electronic sensor of the

older Automatic Buttonhole Feet #3A and #3C.

Works with models 135 PE/145 and 150-180.

Summary of Contents for artista 170 QPE




































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands