manualshive.com logo in svg

Bernina artista 170 QPE, Owner'S Workbook

Share
Download
Bernina artista 170 QPE Owner'S Workbook Download Page 57

M

ASTERING

 Y

OUR

 

BERNINA

®

1/10/02

artista 

170 QPE/180

/57

BERNINA

®

 

artista 

170 QPE/180

M

ASTERING

Y

OUR

BERNINA

®

ATTACHING ELASTIC LACE

Fabric:

Nylon tricot, 6” x 4”
9” of elastic lace

Needle:

80/12 Universal

Thread:

All-purpose sewing thread

Presser Foot:

Reverse Pattern Foot #1/1C

• Select the Running stitch #4.
• Adjust stitch length to 1mm.
• Engage the needle down function.
• Position the elastic wrong side down on the right side of the tricot along one of the 6” edges.
• Leave a tail of elastic at the back of the presser foot for a “handle”.
• Position the elastic so the stitching is at the bottom edge of the elastic lace.
• Stretch the elastic lace gently, as it is being sewn.
• After stitching, trim the surplus tricot from the wrong side of the elastic lace, close to the stitching.
• Mount the sample.

Summary of Contents for artista 170 QPE




































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands