Embroidering Preparation
137
> Tap «Needle Information».
1
2
> Select the needle type (1) of the fitted needle.
> Select the needle type (2) of the fitted needle.
Adjusting the Needle Position Up/Down
> To bring the thread up, push the button «Needle position Up/Down».
– The needle is lowered and raised once.
Attaching the Stitch Plate
The stitch plate (Straight and CutWork Stitch Plate) has a small hole in the needle area. The stitch formation
(thread knotting of upper and bobbin thread) is thus optimized. This results in a more beautiful stitch
appearance.
> To lower the feed dog, push the button «Feed Dog Up/Down».
> Switch off the machine.
> Remove the needle.
> Remove the presser foot.
> At the marking on the upper right corner of the stitch plate, push the stitch plate downwards until it tips.
> Remove the stitch plate.
> Place the opening of the stitch plate (Straight and CutWork Stitch Plate) above the corresponding guide
pins and press it down until it clicks into place.
Summary of Contents for 570 QE
Page 1: ...BERNINA 570 QE User Manual...
Page 2: ......
