manualshive.com logo in svg

Bernina 475 QE, User Manual

Share
Download
Bernina 475 QE User Manual Download Page 19

My BERNINA

19

Illustration

Name

Purpose

Selection of needles

For any common applications.

Screwdriver red (slot)

To loosen and tighten slotted
screws.

Brush/Needle Inserter

To clean the feed dog and the
looper area.

Sewing Machine Oil

To oil the machine.

Power Cable

To connect the machine with the
power supply system.

Foot Control

To start and stop the machine.

To control the sewing speed.

Use of the power cable (only USA/Canada)

The machine has a polarized plug (one contact is wider than the other). To reduce the risk of electric shock,
the plug can only be plugged into the socket in one way. If the plug does not fit into the socket, turn the
plug. If it still does not fit, contact an electrician to install an appropriate outlet. Do not modify the plug in
any way.

Overview presser feet

NOTICE! Depending on the country where the deliveries are sent to, the contents either include

snap-on presser feet or standard presser feet. The respective standard accessory is shown in the

two following charts. When snap-on presser feet are delivered as standard accessory, a claim to

get standard presser feet for free can't be made. The standard presser feet can be ordered as

optional accessory.

Summary of Contents for 475 QE































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands