manualshive.com logo in svg

Bernina 475 QE, User Manual

Share
Download
Bernina 475 QE User Manual Download Page 117

Errors and faults

117

Fault

Cause

Solution

Speed too low

Unfavorable room temperature.

> Place the machine in a warm room one hour before use.

Settings in the Setup Program.

> Adjust the sewing speed in the Setup Program.
> Adjust the slide.

The machine doesn't start

Unfavorable room temperature.

> Place the machine in a warm room one hour before use.
> Connect the machine and switch it on.

The machine is damaged.

> Contact an authorized BERNINA dealer.

Error during firmware update

USB stick is not recognized.

> Use the BERNINA USB stick.

The update process is blocked
and the hourglass on the display
is inactive.

> Remove the USB stick.
> Switch off the machine.
> Switch the machine on.
> Follow the instruction on the display.

Firmware update files are not
found.

> Unzip the update data.
> Store data for the firmware update directly on the data

medium and not in a folder on the USB stick.

Beads and/or bartacks are
repeatedly not sewn properly

The Buttonhole Foot with
Slide #3A is not calibrated with
the machine.

> Calibrate Buttonhole Foot with Slide #3A. (see page 53)

Summary of Contents for 475 QE































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands