manualshive.com logo in svg

Bernina 475 QE, User Manual

Share
Download
Bernina 475 QE User Manual Download Page 106

Care and maintenance

106

12 Care and maintenance

12.1 Firmware

Checking the firmware version

The machine's firmware and hardware versions are displayed.

> Tap «Home».

> Tap «Setup Program».

> Tap «Machine Settings».

> Tap «Information».

> Tap «Machine Data».

Updating firmware

The machine's current firmware and detailed step-by-step instructions for the update process can be

downloaded from 

www.bernina.com

 In general, personal data and settings are automatically transferred

during a firmware update. For reasons of safety, it is also recommended to save data and settings on a
BERNINA USB stick before the firmware update is started. If personal data and settings should get lost during
a firmware update, they can be transferred to the machine again afterwards.

Prerequisite:

•

Accessories such as Embroidery module or BSR Foot which are connected to the machine have been
removed.

> Insert the USB stick with the new firmware version into the machine.
> Tap «Home».

> Tap «Setup Program».

> Tap «Machine Settings».

> Tap «Maintenance/Updates».

Summary of Contents for 475 QE































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands