Embroidery
70
2022-08 EN 5020070.40A.04
6
Embroidery
6.1 Embroidering via the Button «Start/Stop»
In case of a power cut the embroidery process is interrupted. After the restart the machine goes to the
position which was embroidered last.
> Push the button «Start/Stop» until the embroidery machine starts.
– All parts of the design being in the current color are embroidered.
– The embroidery machine stops automatically at the end.
– Both threads are cut automatically.
– The embroidery machine switches to the next color automatically.
> Change the upper thread.
> To embroider the new color, push the button «Start/Stop».
–
After having completed the embroidery design, the machine stops automatically and the threads are
cut automatically.
> To end the embroidery design, tap «Confirm» (1).
1
1
6.2 Increasing the Embroidery Speed
To ensure the best embroidery quality, the speed when embroidering is reduced depending on the
embroidery position. Choose between the two options to either embroider at optimal or maximum speed.
Standard = optimal speed. It has to be considered that the quality of the embroidered embroidery design at
maximum speed cannot be ensured.
By switching the machine off and on, the optimal embroidery speed is activated.
Prerequisite:
•
The embroidery design is selected.
> Tap «Embroidery Speed».
– The maximum speed is activated.
> Tap «Embroidery Speed» again.
– The optimal speed is activated.
Summary of Contents for b70 DECO
Page 1: ...User Manual...
Page 2: ......
