My bernette Embroidery
12
2022-08 EN 5020070.40A.04
Number
Operating
Component
Name
Purpose
2
Thread Cutter
> Press the «Thread Cutter» button in order
to cut the upper and lower threads
automatically.
3
Presser Foot Up/
Down
> Press the «Presser Foot Up/Down» button
to raise the presser foot into a hovering
position.
> Press the button «Presser Foot Up/Down »
to raise the presser foot.
4
Start/Stop
The button «Start/Stop» is used to change
the presser foot position and to start the
machine.
> To start the machine, keep the button
«Start/Stop» pressed for 2 seconds.
> To bring the presser foot into its highest
position, press «Start/Stop» briefly.
> Press the «Start/Stop» button again to
raise the presser foot into hovering
position.
5
Check Embroidery
Design Size
> To position the embroidery hoop
according to the needle position on the
display, press the button «Check
Embroidery Design Size».
6
Needle Up/Down
> To thread the bobbin thread, press
«Needle Up/Down».
7
Upper Multi-
function Knob
With the «Upper Multi-function Knob»
setting values can be changed in the
embroidering and the Setup Program.
8
Lower Multi-
function Knob
Use the «Lower Multi-function Knob» change
the setting values in the embroidery and
setup program.
9
Center of
Embroidery Design
> Touch the icon «Center of Embroidery
Design» to position the hoop so that the
needle is placed exactly over the center of
the embroidery design.
10
Centering the
Needle to the
Embroidery Hoop
> To facilitate the threading of the needle
and to get enough free space from the
needle to the embroidery frame, touch
the icon «Center Embroidery Hoop to the
Needle».
Summary of Contents for b70 DECO
Page 1: ...User Manual...
Page 2: ......
