Embroidery preparation
36
2022-08 EN 5020070.40A.04
> Hold the end of the thread tightly with one hand.
> To start the winding process for a few rotations and then stop, push the button «Start/Stop», so that the
thread is held tight on the bobbin.
> Cut the end of the thread above the inner hole.
> To continue the winding process, push the button «Start/Stop».
> To stop the winding process, push the button «Start/Stopp».
> Push the bobbin winding unit to the left into the starting position.
> Remove the bobbin and cut the thread.
Threading the Bobbin Thread
NOTICE
Needle Breakage Caused by Unevenly Wound Bobbins
Unevenly wound bobbins can lead to incorrect thread tension or cause needles to break.
> Only use evenly wound bobbins.
Prerequisite:
•
The needle is raised.
•
The presser foot is raised.
•
The machine is switched off.
> To open the bobbin cover, push the handle to the right and remove the bobbin cover.
Summary of Contents for b70 DECO
Page 1: ...User Manual...
Page 2: ......
