Selecting an application tool
English
Please observe the application tools intended for
your power tool.
Application tool
BACOT 12V
STARLOCK
Application tool
BACOT 12V
STARLOCK
Application tool
Material
Application
Bi-metal seg-
ment saw blade
Wood-based materi-
als, plastic, non-fer-
rous metals
Separating cuts and plunge saw cuts;
including sawing close to edges, in corners
and in difficult-to-reach areas;
example: Shortening skirting boards that are
already installed or door frames, plunge cuts
when adapting floor panels
Sanding plate
for Delta series
93 mm sanding
sheets
Depends on the
sanding sheet
Sanding surfaces at edges, in corners or in dif-
ficult-to-reach areas;
depending on the sanding sheet, e.g. for sand-
ing wood, paint, varnish, stone;
fleeces for cleaning and for texturing wood, re-
moving rust from metal and for keying varnish,
polishing felt for pre-polishing
Profile sander Wood, pipes/pro-
files, paint, varnish,
filler, metal
Convenient and efficient sanding of profiles up
to a diameter of 55 mm;
red sanding sheets for sanding wood, pipes/
profiles, varnish, filler and metal
Bi-metal plunge
cut saw blade
for wood and
metal
Softwood, soft
plastics, plaster-
board, thin-walled
aluminium profiles
and non-ferrous
metal profiles, thin
sheet metal, non-
hardened nails and
screws
Small separating cuts and plunge cuts;
example: Cutting a recess for sockets, cutting
a copper pipe so that it is flush with a surface,
making plunge cuts in plasterboard
Delicate adaptation work in wood;
example: Sawing recesses for locks and fit-
tings
HCS plunge
cut saw blade
for wood
Wood-based materi-
als, soft plastics
Separating cuts and plunge saw cuts;
including sawing close to edges, in corners
and in difficult-to-reach areas;
example: Thin plunge cut in solid wood for in-
stalling a ventilation grille
Bi-metal plunge
cut saw blade
for hardwood
Hardwood, lamin-
ated boards
Plunge cuts in laminated boards or hardwood;
example: Installation of skylights
TC plunge cut
saw blade,
metal
Metal, extremely ab-
rasive materials,
fibreglass, plaster-
board, cement-bon-
ded fibreboard
Plunge cuts in extremely abrasive materials or
metal;
example: Cutting kitchen front covers, easy
cutting through hardened screws, nails and
stainless steel
Bi-metal plunge
cut saw blade
for wood and
metal
Softwood, hard-
wood, veneered
boards, plastic-
coated boards, non-
hardened nails and
screws
Plunge cuts in laminated boards or hardwood;
example: Shortening door frames, recesses for
a shelf
1 609 92A 4RW • 17.12.18
English
| 19
