Application tool
Material
Application
TC-Riff seg-
ment saw blade
Cement joints, soft
wall tiles, fibreglass-
reinforced plastics,
porous concrete
Making cuts near edges, in corners or in diffi-
cult-to-reach areas;
example: Removing joints between wall tiles
for improvement work, cutting recesses in
tiles, plasterboard or plastics
Diamond-Riff
segment saw
blade
Cement joints, soft
wall tiles, epoxy
resin, fibreglass-rein-
forced plastics
Precise routing and cutting of tile/joint mater-
ial, epoxy resin and fibreglass-reinforced
plastics;
example: Producing small cut-outs in soft wall
tiles and routing recesses in fibreglass-rein-
forced plastic
TC-Riff Delta
plate
Mortar, concrete
residue, wood, ab-
rasive materials
Rasping and sanding on a hard surface;
example: Removing mortar or tile adhesive
(e.g. when replacing damaged tiles), removing
carpet adhesive residue
TC-Riff grout
and mortar re-
mover
Mortar, joints, epoxy
resin, fibreglass-rein-
forced plastics, ab-
rasive materials
Routing and cutting of joint material and tile
material, as well as rasping and sanding on a
hard surface;
example: Removing tile adhesive and joint
mortar
HCS multi
blade
Roofing felt, carpets,
artificial turf, card-
board, PVC flooring
Fast and precise cutting of soft material and
flexible abrasive materials;
example: Cutting carpets, cardboard, PVC
flooring, roofing felt, etc.
Scraper, fixed Carpets, mortar,
concrete, tile adhes-
ive
Scraping on a hard surface;
example: Removing mortar, tile adhesive, con-
crete residue and carpet adhesive residue
Scraper, flex-
ible
Carpet adhesive,
paint residue, silic-
one
Flexible scraping on a soft surface;
example: Removing silicone joints, carpet ad-
hesive residue and paint residue
Bi-metal seg-
ment serrated
blade
Insulation material,
insulation boards,
floor panels, impact
sound insulation
boards, cardboard,
carpets, rubber,
leather
Precise cutting of soft materials;
example: Cutting insulation boards to size, cut-
ting protruding insulation material to length so
that it is flush with the surface
TC-Riff sanding
finger
Wood, paint
Sanding of wood or paint in hard-to-reach
areas without sanding paper;
example: Sanding off paint between window
shutter slats, sanding wooden flooring in
corners
TC-Riff plunge
cut saw blade
Fibreglass, mortar,
wood
Plunge cuts in extremely abrasive materials;
example: Routing of thin mosaic tiles
HCS universal
joint cutter
Expansion joints,
window putty, insula-
tion materials (rock
wool)
Cutting soft materials;
example: Cutting silicone expansion joints or
window putty
Fitting/changing the application tool
English
Remove the application tool if one has already
been fitted.
To remove the application tool, use the hex key
(12)
to loosen the clamping bolt
(11)
and remove
the tool.
20 |
English
1 609 92A 4RW • 17.12.18
