English - 1
1 Thread for auxiliary handle (3x)
2 Spindle lock button
3 On/Off switch
4 Auxiliary handle
5 Grinder spindle
6 Protection guard
7 Clamping screw
8 Coded projection
9 Mounting flange
10 Grinding/cutting disc*
11 Clamping nut*
12
quick-clamping nut *
13 Guard, grinding cup *
14 Grinding cup*
15 Hand guard*
16 Spacers*
17 Rubber sanding pad *
18 Sanding disc*
19 Round nut*
20 Cup brush*
21 Diamond cutting disc *
22 Cutting guide with dust extraction
protection guard*
23 Handle unlocking button
24 Handle
* Not all of the accessories illustrated or described are
included as standard delivery.
Measured values determined according to
EN 50 144.
Typically the A-weighted noise levels of the prod-
uct are: sound pressure level: 93 dB (A); sound
power level: 106 dB (A).
Wear hearing protection!
The typically weighted acceleration is 5.2 m/s
2
.
The machine is intended for cutting, roughing and
brushing metal and stone materials without using
water. For cutting stone, a cutting guide is re-
quired.
Slots in structural walls are subject to the Stand-
ard DIN 1053, Part 1 or country-specific regula-
tions.
These regulations are to be observed under all
circumstances. Before beginning work, consult
the responsible structural engineer, architects or
the construction supervisor.
Tool Specifications
Angle Grinder
BAG-180 CLB
BAG-230 CLB
BAG-230 CLBB
Order number (EU)
(F)
(CH)
000067
000069
002121
002122
000070
019665
Rated power
[W]
2 400
2 400
2 400
Output power
[W]
1 600
1 600
1 600
No-load speed
[rpm]
8 500
6 500
6 500
Grinding disc dia.
[mm]
max. 180
max. 230
max. 230
Reduced starting current
•
•
•
Run-on brake
–
–
•
Grinder spindle thread
M 14
M 14
M 14
Weight without cable, approx.
[kg]
5.3
5.3
5.3
Protection class
/ II
/ II
/ II
Inrush currents cause short-time voltage drops. Under unfavourable power supply conditions, other equipment may be
affected. If the system impedance of the power supply is lower than 0.25 Ohm, disturbances are unlikely to occur.
Machine Elements
Noise/Vibration Information
Intended Use
Information on Structures
BAG 180_230 - Buch Seite 1 Donnerstag, 4. August 2005 2:13 14
