Installation and connection
40
8LVA user's manual V1.0
5 Installation and connection
5.1 Before installation
Read this user's manual completely before performing any work activities.
In addition, take into account the technical documentation for all other machine components as well as the finished
machine.
5.2 Safety
Assembly is only permitted to be carried out in a voltage-free condition and only by qualified personnel
2)
. Before
installation, voltage to the control cabinet must be switched off and prevented from being switched on again.
Only use appropriate equipment and tools. Protect yourself with safety equipment.
Danger!
Personal injury and damage to property caused by unauthorized conversions!
As a result of unauthorized modifications to the product, the performance and limit values can be
negatively affected and dangers can arise. Due to this, severe property damage and injuries cannot
be excluded.
Therefore, unauthorized conversions are prohibited!
•
Do not carry out any unauthorized modifications or alterations to the product.
•
If necessary, contact B&R.
5.2.1 General sources of danger
Tampering of protection or safety devices
Protective and/or safety devices protect you and other persons from dangerous voltage, rotating or moving ele-
ments and hot surfaces.
Danger!
Personal injury and property damage caused by tampering of protective equipment!
If protective or safety devices are removed or put out of operation, there is no longer any personal
protection and serious personal injury and property damage can occur.
•
Do not remove any safety devices.
•
Do not put any safety devices out of operation.
•
Always use all safety devices during short-term test and trial operations!
Dangerous voltage
To operate the motors, dangerous voltage must be applied to certain parts.
2)
The definition of "qualified personnel" can be found in section "Safety" of chapter "General information".
