Technical data
16
8LVA user's manual V1.0
Keyed shaft end
A keyed shaft end is used for a form-fit torque transfer with low demands on the shaft-
hub connection and for handling torque in a constant direction.
The keyways for the servo motors in this series conform to keyway form N1 in accor-
dance with DIN 6885-1. Form A keyed shafts that conform to DIN 6885-1 are used.
Balancing motors with keyways is done using the shaft and fitment key convention in
accordance with DIN ISO 8821. The end of the shaft has a threaded center hole that
can be used to mount machine actuators with shaft end cover plates.
2.4 8LVA - Order key
Order key
8LS
h
gg
ff
nnn
ee
.
d
c
b
8LV
h
gg
-
ff
nnn
ee
.
d
c
b
Cooling type/ construction
(
see section ʺcooling typesʺ)
A
...Self cooled
Valid values:
1,2,3
Lengths
Sizes
Valid values:
2,3
Encoder system
R0
...Resolver
Nominal speed
(See section ʺNominal speedʺ)
Motor options
(See section ʺConnection type, Oil seal, Holding brake, Shaft endʺ)
Special motor options
00
...No special motor options
Motor version:
Valid value: (value assigned automatically and cannot be chosen freely)
0
Additional motor options or special motor options must be arranged with B&R
(See section ʺSizesʺ)
(See section ʺLengthsʺ)
(See section ʺMotor encoder systemsʺ)
B1
...Endat 2.2 Multiturn, 16 - lines
B8
...Endat 2.2 Singleturn
B9
...Endat 2.2 Multiturn
005
...500 rpm
A95
...
950 rpm
015
...1500 rpm
020
...2000 rpm (corresponds to 2100 rpm)
030
...
3000 rpm
Valid values:
D1, S0, S9
Df
...angled swivel connector
Sf
...
angled single-cable solution (hybrid)
Connection type
:
(Size 2 and 3 only)
(Size 2 and 3 only)
