Bernecker + Rainer 4MP181.0843-03, User Manual

Page: 96 / 160

96
Software • Mobile Panel with Automation Runtime
Mobile Panel User's Manual V 1.5
Figure 50: Automation Runtime summary screen
Information Example value Description
Version 03 Displays the factory settings version. These factory settings determine the device ID, display ID,
display-specific initialization sequences, and other important parameters.
Information:
Factory settings are set by B&R and cannot be changed by the user!
DeviceID 1697 Displays the hexadecimal value of the hardware device number.
CompatibilityID 00 Displays the version of the device within the same B&R device code. This ID is needed for Automation
Runtime.
Brightness
(min / typ / max) D5 EA FF Displays the minimum, typical, and maximum values for the brightness settings of the display as
hexadecimal values.
Contrast
(min / typ / max) 00 46 FF Displays the minimum, typical, and maximum values for the contrast settings of the display as
hexadecimal values.
Mode/Node 00 Displays the current operating mode switch positions.
MAC Address 00:60:65:00:C6:A7 Displays the assigned media access control (MAC) address.
BootLoader 2.07 Displays the version of the boot loader.
HW-Layer 1.2.0 Displays the version of the hardware layer.
Onboard AR V2.66 Displays the current onboard Automation Runtime version.
SMC Version AD Displays the current SMC (system management controller) software version.
Table 32: Automation Runtime summary screen