Electrical devices EIB should only be connected and
mounted by an EIB specialist. Manipulations and modi-
fications will result in loss of warranty. The
national specifactions and applicable safety regulations
must be observed.
Despite elaborate safety precautions, exceptionally strong
electrical fields may cause interference with the microprocessor-
controlled time switch. We therefore recommend that you observe
the following points before installation:
➪
Suppress interference of inductive loads by means of an
RC filter
➪
Use a separate line for the mains voltage supply
➪
Do not install device in close proximity to sources of interferen-
ce, e.g. transformers, contactors, PCs and TV sets.
➪
If interference occurs, we recommed that you carry out a RESET
(chapter 4.7) before putting the device back into operation
2.0 MOUNTING INSTRUCTIONS
2.1 Safety information:
2.2 Bus-connection:
24
