BERKEM GALVALINK 302B, User Manual

Page: 5 / 36

01/12/14 Manuale Uso GALVALINK_302B_v3_14 EN Completo 5
1.
WARNINGS
ATTENTION: You must read this manual carefully before carrying out any installation,
operation, adjustment and maintenance on the machine.
ATTENTION: The equipment is not intended for installation in a potentially explosive
atmosphere and, therefore, does not meet the requirements of Directive
94/9/EC “Equipment and protection systems intended for use in potentially
explosive atmospheres”.
ATTENTION: All and only the operations described in this manual are correct: the
manufacturer cannot be held in any way liable for any operations carried out
which do not comply with the specifications and operations not planned in
this manual.
ATTENTION: In the event of a fault or malfunction of the machine, you need to contact a
qualified technical support centre or the manufacturer.
ATTENTION: The manufacturer cannot be held in any way liable for any accidents or harm
to people or damage to property due to non-compliance with the
specifications on safety or determined by improper use or tampering with
the machine. The safety standards described in this manual integrate and do
not replace local standards in force, which must however be complied with
by the user.
2.
GENERAL DATA
2.1 Manufacturer's date
Company: BERKEM S.r.l.
Address: Via Galileo Galilei, 1/A
Locality 35030 Caselle di Selvazzano Dentro (PD)
Country: Italy
2.2 Machine data
Type: GALVALINK 302B PLATING BASE UNIT
Serial number of
machine and
year of
manufacture
See the label applied on the last page of this manual