01/12/14
Manuale Uso GALVALINK_302B_v3_14 EN Completo
26
ANNEX 6 – PROGRAMMING MANUAL (SOFTWARE VER. M20001.4)
On switching on the machine, the DISPLAY represented below (
Fig.7
) activates: to access the MENU for
programming and selection of the parameters press KEY 4. The DISPLAY in
Fig.1
will open.
Fig.1
1.
Accessing the menu
Press KEY 4 to access the menu (
Fig.2
).
Use KEYS 1 and 2 to move up and down
using the cursor to choose the desired menu items. The
item you are about to select is highlighted with the white background.
Fig.2
2.
VOLT/AMPERE
Selecting FIELD 1 (VOLT/AMPERE) the display in
Fig.2
appears where you can choose, using KEYS 1 and 2
the type of supply (in current
AMPERE, or in voltage
VOLT ).
Press KEY 4 to confirm and KEY 3 to return to the initial screen.
The type of supply selected influences the entire machine, i.e. by selecting the VOLT (voltage)
supply all the programs will work by giving priority to voltage and vice-versa selecting the
AMPERE (current) supply all the programs will work giving priority to current.
The type of supply set is displayed at any time by the initial display (Fig.7-6).
KEY 5 allows you to switch on/off the heating resistor.
1
2
3
4
5
Summary of Contents for GALVALINK 302B
Page 2: ...01 12 14 Manuale Uso GALVALINK_302B_v3_14 EN Completo 2 ...
Page 25: ...01 12 14 Manuale Uso GALVALINK_302B_v3_14 EN Completo 25 ANNEX 5 ELECTRICAL CIRCUIT DIAGRAM ...
Page 34: ...01 12 14 Manuale Uso GALVALINK_302B_v3_14 EN Completo 34 ...
Page 35: ...01 12 14 Manuale Uso GALVALINK_302B_v3_14 EN Completo 35 ...
