4 Operation
The operation of functions or electrical consumers can be set individual for each device. Two
operating modes are used:
-
Single button operation:
Switching on or off or dimming brighter/darker, e.g. of lighting, takes place alternately when
the sensor button is pressed repeatedly.
-
Two button operation:
Two sensor buttons next to each other form a function pair. Pressing the left button,
for example, switches or dims lighting on or brighter, pressing the right one switches it off
or makes it darker.
The individual programming of the device means that individual functions and displays may not
be enabled.
Operating a function or load
Consumers such as lighting, blinds, etc. are operated using the sensor buttons (2) and such
operation depends on the programming of the device.
o
Press a sensor button.
The stored function is executed.
i
The actuation pulse is relative to the length of touch. Depending on the function, short and
long actuations may trigger different actions, e.g. switching/dimming.
Operating modes and display icons
The device compares the current room temperature with the setpoint temperature and controls
heating or cooling devices according to the current demand. The setpoint temperature depends
on the current operating mode and can be changed by the user, depending on the
programming. The operating modes and the current controller status are shown in the display.
picture 3
—
Operating mode Comfort
–
Operating mode Standby
˜
Operating mode Night
™
Operating mode Frost/heat protection
š
Display dewpoint operation; controller blocked
—˜
Comfort extension, night
—™
Comfort extension, frost protection
Seite 3/12
30.03.2009
32568601
970-9635000
KNX/EIB
Glass sensor 2gang / 3gang with room thermostat
