The setting is saved.
The display shows the new operating mode.
The setpoint temperature for the room is set according to the new operating mode.
Activating comfort extension
With automatic change-over of the operating modes, e.g. by an external timer, it is nevertheless
possible to retain the comfort mode for some time. This is made possible by the comfort
extension. The comfort extension is subject to a time limit.
The device is in the operating mode Night or Frost/heat protection.
A presence button is programmed.
o
Actuate the Presence button on the device or other installed operating devices.
The display shows the icons
—˜
or
—™
.
The setpoint temperature for comfort mode is set for the set time.
Once the programmed time expires, the original operating mode Night or Frost/heat
protection is restored.
i
The comfort extension can also be activated automatically, e.g. via a presence sensor.
Change setpoint temperatures
For permanent setting of the setpoint temperatures for the Comfort, Standby and Night
operating modes.
The main menu is displayed.
picture 8
o
Press the sensor button
¨
to select the menu item
Pro
for Heating mode
¢
or Cooling
mode
£
and press the sensor button
OK
(picture 8).
o
Press the sensor button
¨
to select the required operating mode and press the
OK
sensor
button.
The setpoint temperature flashes.
o
Reduce setpoint temperature: press the left sensor button
–
.
- or -
o
Increase setpoint temperature: press the right sensor button
+
.
Seite 6/12
30.03.2009
32568601
970-9635000
KNX/EIB
Glass sensor 2gang / 3gang with room thermostat
